|
|
Post by Don on Mar 2, 2004 1:22:34 GMT -5
|
|
|
|
Post by Don on Mar 2, 2004 1:24:04 GMT -5
|
|
|
|
Post by Don on Mar 2, 2004 1:48:27 GMT -5
Take a close look at the spacers under the carb.
Look at the valve covers.....seem a bit tall to you?
That's our new 5/8" SBM valve cover billet aluminum spacer, the end of rocker arm interferance with baffles and PCV valves sucking oil.
BB & SB Mopar available.
Let's look it over:
Coil mounted inside car 36" coil wire....Yikes! ..No problem with the FBO Coil
Check out the throttle cable Hi-Rise adaptor, we're still using the stock original cable. $50.00
It's hard to see but that's our new beveled M/Cylinder spacer to tip the M/C up and away from the header tube...available soon.
Lot's of SS hose we love that stuff and we have it in stock and on sale right now!
Anyone notice the new 9600 radiator?....that's the ones advertised on our web site for $169.00!...Awesome piece.
How about that 1000 BTU cooling fan, yup that's one of our new product lines also.
One wire to the pump, one to the fan and two coming out of the distributor....gotta keep that weight down.
That Distributor will be for sale as soon as I get some new billet ones put together. Anyone need a nice distributor 26 initial 34 total at 2600 RPM?...cheap....$75 with cap and rotor...save $70! (we'll recurve it for $25.00)
Better check out the For Sale section there's some hot buys there right now.
Pro Mag rocker arms new and used Big and Small block
|
|
Rwsj
New Member
Posts: 3
|
Post by Rwsj on Mar 2, 2004 23:05:35 GMT -5
Don
Those spacers look interesting, will they solve the sealing problem my 440 has with my MT valve covers on the EB heads ?
Don't think I have a rocker clearance issue but when they ran it on the dyno first with a set of MP gaskets then a new set of Mr. Gasket gaskets , leaked both times.
|
|
|
|
Post by Don on Mar 5, 2004 18:05:34 GMT -5
Order a set of Cometic gaskets and then tighten in correct sequence....all lower ones then tighten the top ones, that will suck it all down tight. If that doesn't work then order a set of the spacers in 3/8th instead of 5/8th and be prepared to spend about $75 each for them, I'd have to price them out. The one's I have on my engine are $99 each piece....but man they look good!  |
|
|
|
Post by 360DARTGTS on Mar 9, 2004 13:33:44 GMT -5
Pretty cool Don!
What's the goal this year for the 1/4?
It'd go faster if it was B-5 blue. LOL ;D
|
|
|
|
Post by Don on Mar 9, 2004 14:03:36 GMT -5
11.50
|
|
