|
|
Post by PLUM_72 on Apr 22, 2004 13:24:19 GMT -5
Whats the story on this...
RE: I finally got the chance to get my car on the road. It is an awesome pulling machine. It has power all the way from idle to above 5500 RPM
where I shifted it....That is of course except I now may have to go and see my doctor and have my nose removed from the inside of the back of my head. LOL
Ya da man Don!!!!!!!!
(This is one of our 400HP 360 Crate engines, Hydraulic Cam, Pump Gas, Smogger heads)"
Read this in another post...What's the deal on the FBO crate 360? Give us some details!
|
|
|
|
Post by Don on Apr 25, 2004 9:58:37 GMT -5
Just one of our 360 Crate Motors...standard deal, I do the head porting, Bob and or Steve do the machine work and lower end assembly, we finnish them off.
They put out 400+ HP and 400+ tork at 4700 - 5000 RPM. we build about 5-6 a year, they run from $4800 to $6500 depending on what you want and what cores you have for us to work with.
Really a perfect street/strip engine for an A-Body.
Built to make the power at relatively low RPM so you can run a reasonable gear to drive to the track and dependable enough that you don't have to take a trailer with you.
RB Cam, Cometic Head Gaskets, Diamond Pistons, REV Valves, PVT Rocker Arms and allot of very good machining and hand work with the die grinder. 9.2-9.5 pump gas deal.
We just getting ready to deliver one of our 340/362 stroker roller motors to a customer in NJ, we'll be dynoing it this week I'll post the numbers. My guess is 520+ HP easily with the re-worked Eddy Heads and RB Roller cam.
We also have a 340 with a Callais 3.79 stroker crank motor in the shop right now. We'll have the rods on Tuesday and it'll be ready to Dyno in a week or two, this one should make in the 480-520 HP range with X heads.
We just finnished a 383 +.030 motor with Eddy Heads, same basic stuff. It won't be going to the dyno but it will definatley be a tork monster with the Holley Street Dominator manifold and a 150 Giggle Juice shot. Going into a 69 Road Runner Street/Strip toy.
|
|
|
|
Post by rumblefish360 on Apr 25, 2004 11:32:49 GMT -5
OK, what about shortblocks. (S/B)
|
|
|
|
Post by Don on Apr 25, 2004 11:39:29 GMT -5
I guess we could build a shortblock?
What are you looking for?
|
|
|
|
Post by rumblefish360 on Apr 25, 2004 16:17:30 GMT -5
Just wondering.
Looking for a Blonde, 5' 6" max hieght, ..... LOL
|
|
