Post by Don on May 6, 2004 11:04:28 GMT -5
Here's the scoop...
Starting in July we will have available our new SB stroker motors
We will offer them in two designs:
360/3.79 stroke for 387 CID our core or yours
340/3.79 stroke for 396 CID you must supply core
Here's the basic run down
9.3 - 10.3 CR depending on the heads
Indy SB , Edelbrock or your steel heads
3.79 Dragon Slayer Callias Forged Crank
6.125 Callais Forged Rods
Racer Brown Cam solid or Hyd.
Schubeck lifters
REV EV-8 CL series stainless Valves
Milodon Pan
Melling pumps
Diamond Pistons
Cometic Gaskets
Rollmaster Billet timing set
No Shortcuts very few options
All the usual machine work and a good port job on the heads, all pump gas motors and all will be capable of 500 HP with the correct cam/compression selection.
They will be complete from Carb to oil pan, including distributor, Carb linkage adaptor for Automatic cars with kick down, Dual feed kit, Smaller HP versions will be supplied with a ported Carter 120 HV pump and fuel line to dual feed connection.
These will be the most complete engines, producing the most power, using the best parts available.
These engine should be able to ship in 21 days from time of order as we intend on stocking all components except of course the pistons and cams.
We will accept pre-orders now but delivery time will not start until July 15th.
Freight will be $300 or less to most main airports in the lower 48, you will have to pick them up from the freight depot. The freight company will deliver in 5 days or less and load the pallet on your truck.
Starting in July we will have available our new SB stroker motors
We will offer them in two designs:
360/3.79 stroke for 387 CID our core or yours
340/3.79 stroke for 396 CID you must supply core
Here's the basic run down
9.3 - 10.3 CR depending on the heads
Indy SB , Edelbrock or your steel heads
3.79 Dragon Slayer Callias Forged Crank
6.125 Callais Forged Rods
Racer Brown Cam solid or Hyd.
Schubeck lifters
REV EV-8 CL series stainless Valves
Milodon Pan
Melling pumps
Diamond Pistons
Cometic Gaskets
Rollmaster Billet timing set
No Shortcuts very few options
All the usual machine work and a good port job on the heads, all pump gas motors and all will be capable of 500 HP with the correct cam/compression selection.
They will be complete from Carb to oil pan, including distributor, Carb linkage adaptor for Automatic cars with kick down, Dual feed kit, Smaller HP versions will be supplied with a ported Carter 120 HV pump and fuel line to dual feed connection.
These will be the most complete engines, producing the most power, using the best parts available.
These engine should be able to ship in 21 days from time of order as we intend on stocking all components except of course the pistons and cams.
We will accept pre-orders now but delivery time will not start until July 15th.
Freight will be $300 or less to most main airports in the lower 48, you will have to pick them up from the freight depot. The freight company will deliver in 5 days or less and load the pallet on your truck.