Post by Poor Boys Dream on Jun 2, 2004 20:18:26 GMT -5
Hi all, am installing crankcase ventilation system from mr gasket on my race car, instructions are very straight forward, but have looked at a few and the morrosso ones have a little hole on the engine side of the tube that goes into the exhaust to create vacumm, mr gasket does not , should i cut one in or just leave it the way it is?mr gasket
Says to install 3/4 of an inch into the exhaust tube. I look at morrosso one for a buddy of mine and it is only into the exh, tube maybe 1/4 inch. So will doing what instructions say and cutting a little vent tube create to much vacumm or should i just follow instructions to a tee, and be done with them, thanks guys Tim
Says to install 3/4 of an inch into the exhaust tube. I look at morrosso one for a buddy of mine and it is only into the exh, tube maybe 1/4 inch. So will doing what instructions say and cutting a little vent tube create to much vacumm or should i just follow instructions to a tee, and be done with them, thanks guys Tim